Welding in the World

Journal of the International Institute of Welding

Vol. 50. No. 11/12 (November/December 2006)

Research Papers
IIW-1755-06 (ex-doc. IX-2208-06)	Characterization of solidification path for aluminium 6060 weld metal with variable 4043 filler dilution	N. Coniglio	10
IIW-1756-06 (ex-doc. IX-2221-06)	Fusion boundary microstructure evolution in aluminium alloys	A. Kostrivas	11
IIW-1757-06 (ex-doc. IX-2218-06)	Methodology for detecting laser parameters sets for reduced hot crack propensity by using finite element simulations	A. Komlodi	11
IIW-1758-06 (ex-doc. IX-2220-06)	Influence of the weld metal chemical composition on the solidification cracking susceptibility of AA6056-T4 alloy	V. Ploshikhin	5
IIW-1759-06 (ex-doc. IX-2215-06)	The effect of restraint on weld solidification cracking in aluminium	C. E. Cross	4
IIW-1760-06 (ex-doc. IX-2217-06)	Influence of processing conditions on the mechanical properties of aluminium overlap joints : A case study	J. P. Bergmann	10
IIW-1761-06 (ex-doc. IX-2209-06)	Friction stir welding and hybrid laser welding applied to 6056 alloy	W. van Haver	13
IIW-1762-06 (ex-doc. IX-2219-06)	Friction stir welding precipitate hardneable aluminium alloys : A review	C. A. W. Olea,	10
IIW-1764-06 (ex-doc. IX-2216-06)	Microstructure and mechanical properties of the aluminium alloy 6056 welded by friction stir welding techniques	A-L. Lafly	10
IIW-1763-06 (ex-doc. IX-2222-06)	Strength and fatigue resistance of laser-MIG hybrid butt welds of an airframe aluminium alloy AA6013	W. V. Vaidya	9
IIW-1765-06 (ex-doc. IX-2211-06)	Temperature evolution and mechanical properties of dissimilar friction stir weldments when joining AA2024 and AA7075 with an AA6056 alloy	R. Zettler	10

Vol. 50. No. 9/10 (September/October 2006)

Research Papers
IIW-1747-06 (ex-doc. IV-910-06)	- Henry Granjon Prize Competition 2006 - Models for diode laser transformation hardening of steels	H. Pantsar	9
IIW-1748-06 (ex-doc. XII-1890-06)	- Winer, Category B "Materials behaviour and weldability" - Numerical modelling of heat transfer, fluid flow and microstructural evolution during fusion welding of alloys	W. Zhang	11
IIW-1749-06 (ex-doc. IX-2202-06)	The influence of molybdenum on the microstructure of stainless steel welds	T. Anderson	12
IIW-1750-06 (ex-doc. V-1335-06)	- Winer, Category C "Design and structural integrity" - Non-destructive determination of interstitial nitrogen content in austenitic stainless steel weld metal itilizing thermoelectric power	A. Lasseign	5
IIW-1751-06 (ex-doc. VIII-2018-06)	- Winer, Category D "Human related subjects" - Method for sampling and characterizing arc welding fume particles	J. W. Sowards	15
IIW-1746-06 (ex-doc. IX-2148-05)	Metallurgical and corrosion features of friction stir welding of AA5083-H111	P. Vilaca	10
IIW-1744-06 (ex-doc. IX-2162-05)	In-situ weld metal continuous cooling transformation diagrams	B. T. Alexandrov	10
IIW-1742-06 (ex-doc. II-1566-05/ II-A-154-04)	Investigation of HAC-Susceptibility of multi-layer welds the "Bead Bend Test" - Procedure and Examples	G. Posch	7
IIW-1743-06 (ex-doc. XIII-2067-05)	Fatigue strength of welded joints of SUS316L for chemical tankers	T. Iwata	10
IIW-1745-06 (ex-doc. XI-836-05)	Reducing failure risk in welded components	D. N. Shackleton	6

Vol. 50. No. 7/8 (July/August 2006)

Research Papers
IIW-1733-06 (ex-doc. IV-882-05)	Investigation of the strength and quality of aluminium laser-MIG-hybrid welded joints	U. Dilthey,	4
IIW-1734-06 (ex-doc. IX-2154-05)	Effects of the load history on the residual stress distribution in welded components	T. Kannengiesser	7
IIW-1735-06 (ex-doc. IX-2182-05)	Sensitisation of two 11-12% chromium type EN 1.4003 ferritic stainless steels during continuous cooling after welding	M. L. Greef	10
Technical Papers
IIW-1602-03 (ex-doc. XV-835-03)	Use of pulsed CO2 laser roll bonding of A5052 aluminium alloy and low carbon steel	M. Rathod	9
IIW-1625-03 (ex-doc. IV-846-03 /XI-782-03)	Study of underwater laser welding repair technology	I. Morita	7
IIW-1610-03 (ex-doc. IV-847-03)	Laser hybrid welding and laser brazing at Audi and VW	H. Staufer	7
IIW-1732-06 (ex-doc. IV-869-04)	Hybrid laser/GMAW welding aluminum alloy 7075	B. Hu	7
IIW-1736-06 (ex-doc. XIII-2048-05)	Preliminary study of improvement of fatigue properties of welded joints by plasma spray process	L. Huo	6
IIW-1737-06 (ex-doc. XIII-2072-05)	Fatigue assessment of root cracking of fillet welds subject to throat bending using the structural stress approach	W. Fricke	11

Vol. 50. No. 5/6 (May/June 2006)

Research Papers
IIW-1724-05 (ex-doc. III-1343-05)	Development of new ultrasonic inspection technique for spot welds with matrix arrayed probe and SAFT	T. Ikeda,	11
IIW-1725-05 (ex-doc. III-1348-05)	Hybrid simulations for in-line visualisation of welding state in resistance spot welding	K. Matsuyama	10

IIW-1723-05 (ex-doc. IX-2166-05)	Susceptibility of low strength rutile flux-cored weld metal to hydrogen assisted cold cracking	M. Pitrun	14
IIW-1621-03 (ex-doc. X-1526-03)	Surface crack propagation analysis under residual stress field	M. Mochizuki,	8
Technical Papers
IIW-1620-03 (ex-doc. XV-1525-03)	Distortion behaviour of fillet T-Joint during in-process control welding additional cooling	M. Mochizuki,	5
IIW-1726-05 (ex-doc. XV-1192-05)	Seismic performance of fillet welds in moment resisting connections	W. Woerner	8
IW-1727-05 (ex-doc. XV-1193-05)	Full-scale testing of beam-to-RHS column connections with partial joint penetration groove welded joints and assessment of safety from brittle fracture	K. Azuma,	9
Invited Paper
INVT-2006-01 (Thomas Medal Lecture 2004)	Standardization works for resistance welding and allied welding processes	K. Marsuyama	7

Vol. 50. No. 3/4 (March/April 2006)

Research Papers
IIW-1722-05 (ex-doc. III-1347-05)	Resistance spot welding of uncoated and zinc coated Advanced High-Strength Steels(AHSS) — Weldability and process reliability-influence of welding parameters	G.Weber,	10
IIW-1717-05 (ex-doc. IX-2150-05)	Prediction of Sigma Phase precipitation in super duplex stainless steel weldments	K.Nishimoto	16
Technical Papers
IIW-1721-05 (ex-doc. III-1345-05)	Recent advances and improvements in the simulation of resistance welding processes	W. Zhang	9
IIW-1719-05 (ex-doc. VIII-1993-05)	Concerns for the health and safety of welders in 2005	G. Mcmillan	7
IIW-1718-05 (ex-doc. XV-1191-05)	Optimum design and cost comparison of a welded plate stiffened on one side and a cellular plate both loaded by uniaxial compression	J. Farkas, K.	7

IIW-1715-05 (ex-doc. XVI-840-05)	Calculation methods of adhesive bonded hybrid beams in the civil engineering field	M. Wissling	13
IIW-1716-05 (ex-doc. XVI-842-05)	Minimising abrasion and fine fluff in vibration welding	H. Potente,	6

Vol. 50. No. 1/2 (January/February 2006)

Research Papers
IIW-1713-05 (ex-doc. I-1147-04)	Microstructure of thing-gauge austenitic and ferritic stainless steel joints brazed using Metals amorphous foil	E. A. Leone,	12
IIW-1714-05 (ex-doc. I-1148-04)	Effects of reverse voltage on metal/glass anodically-bonded interface	A. Rabinkin,	6
Technical Papers
IIW-1606-03 (ex-doc. IV-836-03)	Improvement of the joint performance in laser welding of aluminium alloys	M. Kutsuna,	6
IIW-1604-03 (ex-doc. IV-837-03)	Laser-MIG hybrid welding of aluminium alloys	K. Shibata,	7
IIW-1698-05 (ex-doc. V-1285-04)	Lack of fusion - Characterisation of indications	G. Rihar,	5
IIW-1696-05 (ex-doc. IX-2134-04)	Stellite failure on a P91 HP valve - Failure investigation and modeling of residual stresses	J. Thorborg	12
IIW-1697-05 (ex-doc. XI-816-04)	Fracture mechanical values of modern pipeline-steels	S. Felber	10
IIW-1700-05 (ex-doc. XI-819-04)	Significance of creep crack initiation for defect assessment	B. Dogan,	9
IIW-1701-05 (ex-doc. XI-820-04)	CRETE Code of Partice for European creep crack groth testing of industrial specimens	B. Dogan,	7